LeveLine EWS

A pressure and temperature sensor reports through a connected telemetry unit that corrects for air-pressure changes. Configured thresholds send messages to designated contacts, while remote requests retrieve current measurements.

LeveLine EWS, image 1 of 3LeveLine EWS, image 2 of 3LeveLine EWS, image 3 of 3
Aquaread
Deployment
Public SaaS, Edge/Local
Services
Installation, Data Analytics, Software Platform

About LeveLine EWS

Rising-water alerts from Aquaread help local authorities, site operators and communities follow rivers or groundwater locations. LeveLine EWS is the early-warning system that combines a submerged level sensor with connected telemetry. It records level and temperature, stores measurements between uploads and sends messages when configured alert conditions are reached.

LeveLine Mini is the pressure-based water-level sensor, while the telemetry unit includes a barometric sensor to compensate for changing air pressure. The updated Aquatel installation uses a 4G modem and supports remote SMS configuration, reading requests and online data delivery. A GPS receiver records deployment position, and internal memory retains data when network communication is interrupted. The attached sensor and cable arrangement is selected for the site.

Operators define alert conditions and recipient contacts before deployment. SMS commands can change logging settings and retrieve current measurements, while historical charts support review of the monitored location. River-bank, borehole and property applications use the same measurement-and-warning approach. Teams verify network reception and probe readings at installation, then connect the warnings with their local response procedure. Alerts describe conditions at the instrument's location and require recipients to decide and carry out the appropriate response.

How it works

Sense
Read submerged pressure and temperature measurements
Connect
Transmit compensated records through cellular telemetry
Analyze
Compare measured levels with configured alarm thresholds
Act
Send configured messages to contacts for local response

Does it fit your project?

Best suited to

  • Local flood-response teams
  • River monitoring communities
  • Groundwater level operating teams

You need

  • Installed level sensor and telemetry unit
  • Cellular service at the monitored site
  • Selected telemetry batteries and sensor supply
  • Alert contacts and local response procedure

Limitations

  • Requires cellular reach for remote messages
  • Requires configured alert levels and contacts
  • Only conditions at installed sensor locations

Cost estimate

Set your scope, see what a LeveLine EWS deployment costs, then ask Aquaread to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,000
$300 – $1,000
$800 – $2,500$800 – $2,500$300 – $1,000
Hardware$800 – $2,500

Sensors, gateways and spare units

Installation and setup$800 – $2,500

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from Aquaread. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,300 – $4,600
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Aquaread sees your budget as indicative unless you mark it approved.

3Ask Aquaread to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Aquaread how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Aquaread receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,300 – $4,600 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Aquaread confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Aquaread should know
Ask Aquaread to confirmAdd other matching solutions

IoT Apps sends the request to Aquaread and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Rising water alerts for municipal response teams
Rising water alerts for municipal response teamsby bemondis

LoRaWAN level sensors send readings to cloud rules so staff can check critical thresholds.

HydroVu for river level alerts
HydroVu for river level alertsby In-Situ

Pressure or radar instruments send measurements over cellular for mapped trends and messages.

Flood monitoring for rivers and reservoirs
Flood monitoring for rivers and reservoirsby Worldsensing

Water-level sensors, weather data and cameras send threshold alerts to the response team.

Water level alerts for flood response teams
Water level alerts for flood response teamsby Ellenex

Ultrasonic instruments send NB-IoT readings to dashboards for river and stormwater checks.

SensiFlood for watershed flood monitoring
SensiFlood for watershed flood monitoringby Evigia Systems

Water level nodes send LTE-M or satellite readings to cloud rules that trigger warnings.

Flood monitoring for emergency response teams
Flood monitoring for emergency response teamsby AEM

Rain and water-level sensors use field telemetry to drive forecasts, maps and threshold warnings.

More from Aquaread

Water quality monitoring for environmental teams
Water quality monitoring for environmental teamsMultiparameter probes use Modbus or 4G links for chemistry records, threshold alerts and…

Questions and answers

How does the system correct changing atmospheric pressure?

A barometric sensor in the telemetry arrangement compensates the measurements from the submerged pressure sensor.

Can contacts request a reading between scheduled updates?

Yes. SMS commands request current measurements and support changes to logging settings or alert configuration.

How many alarm messages and recipient numbers can Aquatel handle?

The telemetry unit supports 16 unique alarms that can be sent to as many as 40 stored phone numbers.

What happens to records when cellular communication is interrupted?

The telemetry unit retains measurements in internal memory for later transfer, while remote messages require a working network connection.

How can a community price a warning installation?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Aquaread to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $6,000 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from Aquaread.

ServicesInstallation, Data Analytics, Software Platform, Support & Maintenance
Hardware modelRequired, Proprietary
Available inWorldwide

Have a question for Aquaread?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.