Heat exchanger monitoring for plant maintenance teams

Temperature, flow and differential-pressure instruments feed plant connections and exchanger analysis software. Teams compare heat transfer with a clean baseline, follow fouling changes and review cleaning priorities.

Heat exchanger monitoring for plant maintenance teams, image 1 of 3Heat exchanger monitoring for plant maintenance teams, image 2 of 3Heat exchanger monitoring for plant maintenance teams, image 3 of 3
Emerson Plantweb Insight
Headquarters
United States
Deployment
On-Premises, Edge/Local
Services
Installation, Managed Service, Support & Maintenance

About Heat exchanger monitoring for plant maintenance teams

Comparing present heat transfer with a clean exchanger baseline helps teams assess a change in performance. Emerson combines process measurements with an application for shell-and-tube heat exchangers. Operating and maintenance staff can examine fouling, heat duty and related indicators to decide which equipment needs further assessment or cleaning work.

The measurement arrangement includes suitable temperatures, flow measurements and differential-pressure inputs for the exchanger. Differential pressure is the pressure difference across the relevant part of the equipment. Wireless instruments can pass these readings through a compatible plant gateway, and supported industrial interfaces can supply suitable existing data. The application runs on the analysis platform, normally a local virtual machine with browser access over the configured network. A cloud installation adds a site connector and hosted software.

The software uses the supplied measurements to calculate heat-transfer performance and compare it with the configured baseline. Staff follow fouling trends, changing heating requirements and pressure differences, then review cleaning recommendations based on those indicators or estimated lost energy costs. Keeping the measurements and calculated values together helps the team organise a cleaning assessment and check how performance changes after the exchanger returns to service.

How it works

Sense
Measure exchanger temperatures, flows and pressure differences.
Connect
Bring instrument values through compatible plant data connections.
Analyze
Calculate heat transfer and compare fouling with a clean baseline.
Act
Review cleaning priorities and check performance after service.

Does it fit your project?

Best suited to

  • Plant heat transfer engineers
  • Exchanger maintenance planning teams
  • Industrial energy operating staff

You need

  • Suitable temperature flow and pressure instruments
  • Supported plant measurement data sources
  • Platform and exchanger analysis application
  • Configured clean performance baseline

Limitations

  • Requires suitable process measurement inputs
  • Requires configured clean exchanger baseline
  • No automatic exchanger cleaning

Cost estimate

Set your scope, see what a Heat exchanger monitoring for plant maintenance teams deployment costs, then ask Emerson Plantweb Insight to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,000
$300 – $1,000
$800 – $2,500$800 – $2,500$300 – $1,000
Hardware$800 – $2,500

Sensors, gateways and spare units

Installation and setup$800 – $2,500

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from Emerson Plantweb Insight. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,300 – $4,600
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Emerson Plantweb Insight sees your budget as indicative unless you mark it approved.

3Ask Emerson Plantweb Insight to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Emerson Plantweb Insight how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Emerson Plantweb Insight receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,300 – $4,600 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Emerson Plantweb Insight confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Emerson Plantweb Insight should know
Ask Emerson Plantweb Insight to confirmAdd other matching solutions

IoT Apps sends the request to Emerson Plantweb Insight and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Machine vibration and temperature tracking for plants
Machine vibration and temperature tracking for plantsby Asystom

Multisensor beacons use LoRaWAN gateways to send ultrasound readings and learned anomaly records.

Plant machinery diagnostics for industrial reliability teams
Plant machinery diagnostics for industrial reliability teamsby Bently Nevada

Machine systems feed operating data to connected software for alarm review and repair planning.

Bucket elevator monitoring for bulk handling operators
Bucket elevator monitoring for bulk handling operatorsby Urban.io

Vibration and thermal probes relay radio readings to cloud histories, thresholds and notifications.

Condition records for chemical shipments
Condition records for chemical shipmentsby Logmore

QR loggers capture moisture and impacts for cloud reports used in packaging and label reviews.

CLUEY for combined heat and power
CLUEY for combined heat and powerby Comtac

Temperature probes and contacts feed a wireless unit with fault, water and mains-failure events.

Compressor performance reporting for maintenance teams
Compressor performance reporting for maintenance teamsby Airleader

Meters use RS485 and Ethernet to chart loaded and idle states, costs and service reminders.

More from Emerson Plantweb Insight

Air cooler monitoring for plant maintenance teams
Air cooler monitoring for plant maintenance teamsWireless vibration, temperature and position inputs feed software for equipment faults…
Industrial lighting control for plant operating teams
Industrial lighting control for plant operating teamsConnected luminaires send wireless status to software that sets brightness, schedules and…
Valve condition monitoring for plant maintenance teams
Valve condition monitoring for plant maintenance teamsPositioner diagnostics feed connected software for repair urgency, trends and recommended…
Cooling tower monitoring for plant operating teams
Cooling tower monitoring for plant operating teamsTemperature, flow and equipment instruments feed connected software for water use and…
Pump condition monitoring for plant maintenance teams
Pump condition monitoring for plant maintenance teamsVibration and process instruments feed connected software for cavitation, strainer and…
Rotating asset monitoring for plant maintenance teams
Rotating asset monitoring for plant maintenance teamsVibration and temperature sensors feed connected software for equipment status and…

Questions and answers

What exchanger type does this application assess?

It provides performance monitoring for shell-and-tube heat exchangers using suitable process measurements.

What does differential pressure mean in this installation?

It is the pressure difference across the relevant exchanger section, measured by a suitable pressure instrument.

How does the application assess fouling?

It compares current heat-transfer performance with a configured baseline representing a clean exchanger.

Which measures inform cleaning recommendations?

High fouling, high differential pressure or estimated lost energy costs can inform the cleaning assessment.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Emerson Plantweb Insight to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $6,000 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from Emerson Plantweb Insight.

VendorEmerson Plantweb Insight, United States
DeploymentOn-Premises, Edge/Local
ServicesInstallation, Managed Service, Support & Maintenance, Data Analytics, Software Platform, System Integration
Hardware modelRequired, Mixed Ecosystem
Available inWorldwide

Uses this hardware

Mandatory
AMS Wireless Vibration Monitor
AMS Wireless Vibration MonitorEmerson Plantweb Insight · AMS Wireless Vibration Monitor · Sensor

Have a question for Emerson Plantweb Insight?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.