Evaluates configured thresholds or schedules, presents current state.
Operators responsible for remote pumps, valves, relays, actuators, tanks, pipelines, irrigation or utility equipment, sensors, control rules, operators, and command histories cannot continuously inspect every operating condition or developing fault. Periodic checks leave gaps between readings, while isolated local indicators provide limited history and context. A late response can cause downtime, safety exposure, equipment damage, or incomplete compliance evidence. Teams need timely measurements, clear exceptions, and a defined operating response.
Ellenex LPWAN Closed-Loop Remote Equipment Control combines connected field data with application software. Connected sensors capture the configured physical condition while supported interfaces exchange actuator state, command status, time, battery, signal, and device health. The application evaluates configured thresholds or schedules, presents current state, issues supported commands. Authorized teams remotely start, stop, open, close, reset, or schedule equipment, verify the resulting condition, override safely, and investigate failures.
Teams configure the monitored assets, users, and operating rules. Connected sensors capture the configured physical condition while supported interfaces exchange actuator state, command status, time, battery, signal, and device health. Ellenex devices use the configured LoRaWAN, NB-IoT, or LTE-M path to exchange field records, alarms, and supported commands with its cloud application. The application evaluates configured thresholds or schedules, presents current state, issues supported commands. Authorized teams remotely start, stop, open, close, reset, or schedule equipment, verify the resulting condition, override safely, and investigate failures.
Vendor documentation: vendor website
Evidence level: L1 · Vendor-stated: how evidence levels work
Connected sensors capture the configured physical condition while supported interfaces exchange actuator state, command status, time, battery, signal, and device health
Ellenex devices use the configured LoRaWAN, NB-IoT, or LTE-M path to exchange field records, alarms, and supported commands with its cloud application
The application evaluates configured thresholds or schedules, presents current state, issues supported commands
Authorized teams remotely start, stop, open, close, reset, or schedule equipment, verify the resulting condition, override safely, and investigate failures
Designed for water and wastewater systems, irrigation, industrial utilities, remote facilities, energy operations, and infrastructure sites requiring low-bandwidth monitored control
Authorized users can review current status, history, and operating exceptions
Attributes fewer than 20% of comparable Energy & Utilities listings share:
Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region, and get integration guidance. Included with IoT Apps Enterprise.
Fit, availability or a detail on this page. Goes straight to Ellenex, no RFP needed.
Trends each water point, evaluates rising or falling thresholds.
The cloud application trends differential pressure.
Trends equipment signals, compares operating states.
Battery-powered NB-IoT sensors report pipeline and compressor pressure every few hours, surfacing leaks in underground water and…
A digital twin fed by SCADA, meter, and weather data simulates entire district heating, cooling, and steam grids, helping…
RedLook detects a supported plume, localizes its source.
Gas Detection Connect and connected X-dock records show fleet health, compliance status.
The iba system structures energy signals, calculates performance indicators.
