Pump and valve control for farm teams

Pump and valve controllers use NB-IoT to apply phone commands, schedules and linked sensor rules. Farm teams review tank and flow conditions, then switch compatible equipment or adjust its operating programme.

Pump and valve control for farm teams, image 1 of 4Pump and valve control for farm teams, image 2 of 4Pump and valve control for farm teams, image 3 of 4Pump and valve control for farm teams, image 4 of 4
Edge Systems
Headquarters
Australia
Connectivity
NB-IoT
Deployment
Public SaaS
Services
Installation, System Integration, Support & Maintenance

About Pump and valve control for farm teams

Connected water controls give farm teams a way to manage pumps and valves across their property. Edge Systems combines NB-IoT controllers, mobile commands and scheduling tools for compatible AC pumps, DC solar pumps and water valves. Operators apply remote on or off actions, set timed operation and link the control rules with tank-level or flow measurements from other installed devices.

The AC pump controller supports suitable single-phase and three-phase arrangements, while the DC solar offering provides a separate controller for compatible solar pumps. Valve controllers operate electric solenoid and motorised valves, opening or closing them through the platform. NB-IoT carries controller messages between the farm installation and the mobile application or dashboard. On-site manual switches provide another way to operate the connected equipment. Tank and flow sensors supply the measurement inputs used by configured automation rules.

Staff set the operating times and sensor conditions for pumping, refill or shutoff. The system applies those assigned commands and presents the returned equipment record in the dashboard. Pump-state feedback is offered as an additional AC feature. Farm operators examine the measurements and control history, adjust the next operating period and check the installed equipment when a reported condition needs attention. The combined controls and records support the team's daily water-management work.

How it works

Sense
Read connected tank and flow measurements for water rules.
Connect
Exchange NB-IoT messages with installed controllers.
Analyze
Apply assigned schedules and sensor-based operating rules.
Act
Switch compatible pumps or valves and review their records.

Why teams choose it

Condition sensing
Cellular connectivity
Operational analytics
Automated control

Does it fit your project?

Best suited to

  • Farm irrigation operating teams
  • Remote water supply managers
  • Agricultural pump maintenance staff

You need

  • Compatible pump and valve controllers
  • Tank or flow sensors for automation
  • Supported NB-IoT network connection
  • Supply matching installed controller

Limitations

  • Requires compatible pumps and valves
  • Requires appropriate electrical installation
  • Only equipped AC units report status
  • Requires correctly configured sensor control rules

Cost estimate

Set your scope, see what a Pump and valve control for farm teams deployment costs, then ask Edge Systems to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

Australia
Any
Any
Any
None
No

2Your estimate

$2,900 – $9,700
$400 – $1,500
$1,700 – $5,000$800 – $3,200$400 – $1,500
Hardware$1,700 – $5,000

Sensors, gateways and spare units

Installation and setup$800 – $3,200

Site survey, mounting, commissioning and configuration

Software and services$400 – $1,500

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in Australia, from comparable deployments, reviewed September 2026. Not a quote from Edge Systems. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$5,200 – $7,400
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Edge Systems sees your budget as indicative unless you mark it approved.

3Ask Edge Systems to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Edge Systems how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Edge Systems receives
Scope1 site, 10 assets, Australia, any connectivityBudget$5,200 – $7,400 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Edge Systems confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Edge Systems should know
Ask Edge Systems to confirmAdd other matching solutions

IoT Apps sends the request to Edge Systems and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Irrigation scheduling and water rates for growers
Irrigation scheduling and water rates for growersby CropX

Soil and canopy sensors send data through telemetry to refill advice and chosen automatic controls.

Irrigation scheduling and valve control for growers
Irrigation scheduling and valve control for growersby Easy IoT

Actuators receive LoRaWAN commands from cloud rules to start, stop or schedule field watering.

GrowSphere
GrowSphereby Netafim

Field sensors and controllers link to cloud software for watering advice, valve actions and reports.

CLUEY for agricultural irrigation valve control
CLUEY for agricultural irrigation valve controlby Comtac

Soil probes and flow inputs reach a wireless console that schedules watering and closes main valves.

Irrigation control for orchard water management teams
Irrigation control for orchard water management teamsby Semios

Field probes and pressure sensors feed an app that schedules matched pumps and valves remotely.

Kheiron for farm irrigation management
Kheiron for farm irrigation managementby IoThink Solutions

Soil probes and water meters feed connected field dashboards for watering schedules and leak checks.

More from Edge Systems

Farm weather readings for field operating teams
Farm weather readings for field operating teamsA solar sensor unit sends NB-IoT measurements to phone charts and threshold messages.
Electric fence voltage alerts for farm teams
Electric fence voltage alerts for farm teamsBattery probes send NB-IoT measurements to phone histories and threshold messages.
Electrical readings for farm equipment maintenance teams
Electrical readings for farm equipment maintenance teamsClamp sensors and voltage inputs send cellular data to online histories and exception…
Farm CCTV events for rural operating teams
Farm CCTV events for rural operating teamsCameras send 4G or Wi-Fi video to a dashboard with clips and motion-event messages.
Water levels and flow for farm teams
Water levels and flow for farm teamsTank and dam sensors send NB-IoT measurements to app graphs, threshold messages and pump…
Feed silo levels for farm supply teams
Feed silo levels for farm supply teamsUltrasonic battery sensors send NB-IoT measurements to app histories and replenishment…

Questions and answers

Which pump arrangements are covered by the controller range?

The range includes AC controllers for suitable single-phase and three-phase pumps and a separate DC solar pump offering.

What types of valves can be operated remotely?

The valve controller operates compatible electric solenoid and motorised valves, with remote opening and closing and an on-site manual switch.

How can tank levels affect pump or valve operation?

Compatible tank sensors and flow monitors provide inputs for configured refill, shutoff and other automatic operating rules.

Is pump-state feedback included in every AC controller?

Pump-state feedback is an additional AC feature, so it must be included in the installed controller arrangement.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Edge Systems to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in Australia, IoT Apps estimates $2,900 – $9,700 in the first year and $400 – $1,500 every year after. This is an estimate based on comparable deployments, not a quote from Edge Systems.

DeploymentPublic SaaS
ServicesInstallation, System Integration, Support & Maintenance, Data Analytics, Software Platform
Hardware modelRequired, Proprietary, Not Required
Available inAustralia

Uses this hardware

Mandatory
Edge 2-inch Valve Controller
Edge 2-inch Valve ControllerEdge Systems · Edge 2-inch Valve Controller · Controller, LPWAN
Mandatory
Edge AC Pump Controller
Edge AC Pump ControllerEdge Systems · Edge AC Pump Controller · Controller, LPWAN

Have a question for Edge Systems?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.