Indoor air measurements for building energy teams

Wireless sensors send CO2, temperature and humidity readings through gateways to cloud tools and building management systems. Energy teams review room conditions and adjust heating, cooling or ventilation settings.

Indoor air measurements for building energy teams, image 1 of 3Indoor air measurements for building energy teams, image 2 of 3Indoor air measurements for building energy teams, image 3 of 3
Disruptive Technologies
Headquarters
Norway
Connectivity
Proprietary Sub-GHz, Ethernet, 4G
Deployment
Public SaaS
Services
Installation, System Integration, Support & Maintenance

About Indoor air measurements for building energy teams

Room measurements connect building energy reviews with the conditions inside occupied spaces. Disruptive Technologies provides wireless environmental and occupancy sensors with gateway and cloud access. Building teams use carbon dioxide, temperature and humidity records to examine ventilation, heating and cooling alongside the periods when a space is being used.

The CO2 sensor uses non-dispersive infrared measurement and also records temperature, relative humidity and air pressure. Sensors communicate through SecureDataShot, the low-power radio protocol operating at 868 or 915 MHz. Cloud Connector gateways relay the records through Ethernet or cellular service. Studio provides the web interface, while a REST API and webhooks pass sensor data to other software and building management systems.

Staff review the readings and manually adjust heating, cooling or airflow. Integration with a building management system also provides the data route for demand-controlled ventilation, where airflow responds to conditions in the occupied space. Occupancy measurements inform operating schedules. These records give the energy team a common basis for examining room conditions and preparing the next ventilation or temperature-setting review.

How it works

Sense
Measure CO2, temperature, humidity and occupied-space activity.
Connect
Pass sensor records through gateways to cloud tools or APIs.
Analyze
Review room conditions alongside building operating schedules.
Act
Adjust HVAC settings or supply data to building controls.

Proven in the field

12 sensors expose HVAC waste at Factory No. 7
Business case

12 sensors expose HVAC waste at Factory No. 7

Scale12 temperature sensors on HVAC equipment plus additional office-temperature monitoringOutcome12 HVAC temperature sensorsReported byDisruptive Technologies, 2021
Read the business case

Does it fit your project?

Best suited to

  • Building energy operating teams
  • Facilities ventilation maintenance groups
  • Property environmental review departments

You need

  • Environmental and occupancy sensors
  • Cloud Connector gateway
  • SecureDataShot radio and backhaul
  • Studio web application access

Limitations

  • Requires integration for building controls
  • Only monitored room measurements included
  • No guaranteed energy reduction

Cost estimate

Set your scope, see what a Indoor air measurements for building energy teams deployment costs, then ask Disruptive Technologies to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $5,800
$300 – $1,000
$700 – $2,100$900 – $2,700$300 – $1,000
Hardware$700 – $2,100

Sensors, gateways and spare units

Installation and setup$900 – $2,700

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from Disruptive Technologies. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,200 – $4,500
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Disruptive Technologies sees your budget as indicative unless you mark it approved.

3Ask Disruptive Technologies to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Disruptive Technologies how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Disruptive Technologies receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,200 – $4,500 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Disruptive Technologies confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Disruptive Technologies should know
Ask Disruptive Technologies to confirmAdd other matching solutions

IoT Apps sends the request to Disruptive Technologies and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
AirWits for building energy management
AirWits for building energy managementby Connected Inventions

CO2, temperature and humidity sensors send wireless readings to cloud tools for HVAC adjustments.

Energy monitoring and control for buildings
Energy monitoring and control for buildingsby Milesight

Current clamps send LoRaWAN readings to reports and compatible lighting or thermostat rules.

Continuous system optimisation for facility operating teams
Continuous system optimisation for facility operating teamsby Bueno Systems

Connected plant records feed cloud analysis that recommends improvements and tracks their effects.

Heating performance monitoring for housing retrofit teams
Heating performance monitoring for housing retrofit teamsby IoT Solutions Group

Boiler probes and room devices send cellular data to software for before-and-after energy checks.

District heat performance tracking for utility operators
District heat performance tracking for utility operatorsby bemondis

Connected sensors feed cloud analysis so staff can compare consumption and investigate faults.

Building energy management for facility operators
Building energy management for facility operatorsby Smappee

Meters feed a local controller and cloud views to coordinate electricity use, solar and EV charging.

More from Disruptive Technologies

Cold storage alerts for facilities operating teams
Cold storage alerts for facilities operating teamsWireless probes and door switches send readings via gateways to cloud logs and threshold…
Workplace occupancy records for facilities planning teams
Workplace occupancy records for facilities planning teamsDesk and motion sensors send presence readings through a gateway to cloud dashboards and…

Questions and answers

Which measurement method does the CO2 sensor use?

It uses non-dispersive infrared measurement.

Which readings accompany CO2 on the environmental sensor?

It also records temperature, relative humidity and air pressure.

Which software interfaces pass readings into other applications?

Connections include a REST API and webhooks.

How does the application support demand-controlled ventilation?

Sensor data integrates with the building management system, providing measured conditions for ventilation control.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Disruptive Technologies to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $5,800 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from Disruptive Technologies.

MeasuresTemperature,Humidity,Air quality
Alerts and outputsAPI,Webhook
ConnectivityProprietary Sub-GHz, Ethernet, 4G, LTE-M
DeploymentPublic SaaS
ServicesInstallation, System Integration, Support & Maintenance, Data Analytics, Software Platform
Hardware modelRequired, Proprietary
Available inWorldwide

Uses this hardware

Recommended
Disruptive Technologies Cloud Connector 2nd Gen
Disruptive Technologies Cloud Connector 2nd GenDisruptive Technologies · Cloud Connector 2nd Gen · Gateway, Cellular
Recommended
Disruptive Technologies CO2 Sensor
Disruptive Technologies CO2 SensorDisruptive Technologies · CO2 Sensor · Sensor, LPWAN
Recommended
Disruptive Technologies Motion Sensor
Disruptive Technologies Motion SensorDisruptive Technologies · Motion Sensor · Sensor, LPWAN
Recommended
Disruptive Technologies Temperature & Humidity Sensor
Disruptive Technologies Temperature & Humidity SensorDisruptive Technologies · Temperature & Humidity Sensor · Sensor, LPWAN
Recommended
Disruptive Technologies Temperature Sensor
Disruptive Technologies Temperature SensorDisruptive Technologies · Temperature Sensor · Sensor, LPWAN

Have a question for Disruptive Technologies?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.