Aerial asset inspection for renewable energy teams

Drone cameras capture visual and thermal measurements of wind, solar and hydro structures for cloud-based analysis. Renewable operators review defects, compare earlier surveys and organise maintenance through shared asset records.

Aerial asset inspection for renewable energy teams, image 1 of 2Aerial asset inspection for renewable energy teams, image 2 of 2
Cyberhawk
Headquarters
United Kingdom
Deployment
Public SaaS
Services
Managed Service, System Integration, Support & Maintenance

About Aerial asset inspection for renewable energy teams

Drone-captured images help renewable operators review wind turbines, solar arrays and hydro structures. Cyberhawk combines visual and thermal inspections with iHawk, its aerial data management platform. The service brings image records and defect analysis together for repair planning across renewable assets and operating sites.

Drone cameras capture blade surfaces, solar panels and hard-to-reach hydro structures. Visual and thermal data provide inputs for checking blade erosion, panel hotspots and structural changes. The platform organises images and defect records in a searchable environment. Wind blade defects are logged, sized and categorised against equipment-supplier standards. Solar measurements identify panel anomalies, while hydro imagery provides a record of the inspected structures.

Operators examine the recorded defects and prioritise maintenance or further engineering checks. Earlier surveys provide context for comparing changes across the same asset. Shared platform access lets operating teams review the images and repair status together. Hydro inspection records track defects and their closure, while wind and solar records support fleet-level maintenance planning. These survey and analysis outputs give the team a record of asset condition for its operating review.

How it works

Sense
Capture renewable structures with visual and thermal cameras.
Connect
Upload survey imagery to the shared cloud data platform.
Analyze
Log, size and categorise defects against the asset record.
Act
Plan repairs and compare changes with earlier surveys.

Does it fit your project?

Best suited to

  • Wind turbine operating teams
  • Utility-scale solar asset departments
  • Hydro structure maintenance groups

You need

  • Drone visual and thermal cameras
  • Aerial image and defect-management platform
  • Asset inspection and engineering review

Limitations

  • Only surveyed assets supply inspection records
  • Requires engineering review of defects
  • No guaranteed output or failure prevention

Cost estimate

Set your scope, see what a Aerial asset inspection for renewable energy teams deployment costs, then ask Cyberhawk to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,000
$300 – $1,000
$800 – $2,500$800 – $2,500$300 – $1,000
Hardware$800 – $2,500

Sensors, gateways and spare units

Installation and setup$800 – $2,500

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from Cyberhawk. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,300 – $4,600
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Cyberhawk sees your budget as indicative unless you mark it approved.

3Ask Cyberhawk to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Cyberhawk how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Cyberhawk receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,300 – $4,600 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Cyberhawk confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Cyberhawk should know
Ask Cyberhawk to confirmAdd other matching solutions

IoT Apps sends the request to Cyberhawk and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Machine vibration and temperature tracking for plants
Machine vibration and temperature tracking for plantsby Asystom

Multisensor beacons use LoRaWAN gateways to send ultrasound readings and learned anomaly records.

SF6 loss alerts for electrical maintenance teams
SF6 loss alerts for electrical maintenance teamsby bemondis

LoRaWAN density sensors feed a cloud view so staff can check critical insulation gas changes.

Plant machinery diagnostics for industrial reliability teams
Plant machinery diagnostics for industrial reliability teamsby Bently Nevada

Machine systems feed operating data to connected software for alarm review and repair planning.

CLUEY for combined heat and power
CLUEY for combined heat and powerby Comtac

Temperature probes and contacts feed a wireless unit with fault, water and mains-failure events.

Water network condition monitoring for utilities
Water network condition monitoring for utilitiesby Microtronics

Field loggers send flow, pressure and quality readings to a platform with alarms and histories.

Transformer condition alerts for substation maintenance teams
Transformer condition alerts for substation maintenance teamsby Dynamic Ratings

Electrical sensors feed winding, bushing and tap-changer readings to software for fault review.

More from Cyberhawk

Aerial survey maps for site planning teams
Aerial survey maps for site planning teamsDrone cameras and LiDAR feed cloud processing, with georeferenced imagery, meshes and…
Construction progress records for capital project teams
Construction progress records for capital project teamsDrone images feed cloud maps and 3D models, with dated tours, annotations and document…
Methane emissions measurement for industrial site teams
Methane emissions measurement for industrial site teamsDrone gas sensors feed a cloud workspace, with georeferenced readings and dated source…
Oilfield and marine asset inspection for operators
Oilfield and marine asset inspection for operatorsDrone cameras and ultrasonic sensors feed cloud records, with thickness, heat and defect…
Plant condition inspection for power generation teams
Plant condition inspection for power generation teamsDrone cameras send visual and thermal imagery to cloud software, with defect histories…
Grid asset and vegetation inspection for utilities
Grid asset and vegetation inspection for utilitiesDrone LiDAR and cameras feed maps, with ranked encroachments, thermal faults and storm…

Questions and answers

How are wind blade defects recorded after the drone survey?

Defects are logged, sized and categorised against equipment-supplier standards in iHawk, the aerial data platform.

What solar issues do the thermal and visual surveys identify?

The surveys identify panel hotspots, string failures and degradation for review.

Does the renewable workflow include hydro structures?

Yes. Drone imagery covers hard-to-reach hydro assets and supports defect tracking and status closure.

Can renewable operators compare repeat inspection records?

Yes. Recorded surveys and asset histories support comparison of condition changes over time.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Cyberhawk to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $6,000 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from Cyberhawk.

VendorCyberhawk, United Kingdom
DeploymentPublic SaaS
ServicesManaged Service, System Integration, Support & Maintenance, Data Analytics, Software Platform, Consulting/Development
Hardware modelOptional, Mixed Ecosystem, Not Required
Available inWorldwide

Have a question for Cyberhawk?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.