Sulphur removal monitoring for industrial combustion plants

Gas and particulate instruments measure flue conditions around sulphur-removal stages and feed plant systems. Combustion operators compare process readings to assess scrubber performance and investigate changes.

Sulphur removal monitoring for industrial combustion plants, image 1 of 4Sulphur removal monitoring for industrial combustion plants, image 2 of 4Sulphur removal monitoring for industrial combustion plants, image 3 of 4Sulphur removal monitoring for industrial combustion plants, image 4 of 4
CODEL International
Headquarters
United Kingdom
Deployment
On-Premises, Public SaaS
Services
Installation, System Integration, Support & Maintenance

About Sulphur removal monitoring for industrial combustion plants

Process measurements help industrial teams assess the operation of flue-gas sulphur removal. CODEL supplies gas, dust and flow monitoring instruments for Flue Gas Desulphurisation, or FGD, systems. The application covers input and output conditions around selected scrubber arrangements used in combustion and other industrial processes.

GCEM40, the in-situ infrared gas analyser, measures selected gases through a process probe. An extractive analyser provides another sampling option for the appropriate installation. DCEM2100, the optical dust monitor, measures opacity or particulate concentration through a dual-pass light path. Selected flow instruments add gas-velocity readings. Instrument outputs connect to the plant's control and data systems so the parameters can be reviewed around the treatment stage.

Operators compare sulphur dioxide and other selected gas readings with particulate or flow records to examine the process. The data support checks on wet, dry or semi-dry treatment arrangements, where sorbents react with acidic gases and the reaction products are removed by the process equipment. Operating teams use the measurements for performance review, investigation and the site's selected emissions-reporting workflow.

How it works

Sense
Measure selected gases around the sulphur-removal stage.
Connect
Connect instrument outputs to plant data and controls.
Analyze
Compare treatment readings with particulate and flow data.
Act
Assess scrubber performance and investigate changes.
Sulphur removal monitoring for industrial combustion plants, image 2

Does it fit your project?

Best suited to

  • Industrial sulphur-removal process teams
  • Combustion plant scrubber operators
  • Wet and dry treatment installations

You need

  • Selected gas, dust and flow monitors
  • Suitable instrument electrical supplies
  • Plant measurement and control systems

Limitations

  • Only selected gas species are measured
  • Requires suitable scrubber measurement locations
  • No automatic removal of sulphur dioxide

Cost estimate

Set your scope, see what a Sulphur removal monitoring for industrial combustion plants deployment costs, then ask CODEL International to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United Kingdom
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,300
$300 – $1,000
$800 – $2,600$800 – $2,700$300 – $1,000
Hardware$800 – $2,600

Sensors, gateways and spare units

Installation and setup$800 – $2,700

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United Kingdom, from comparable deployments, reviewed September 2026. Not a quote from CODEL International. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,400 – $4,800
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; CODEL International sees your budget as indicative unless you mark it approved.

3Ask CODEL International to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell CODEL International how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
CODEL International receives
Scope1 site, 10 assets, United Kingdom, any connectivityBudget$3,400 – $4,800 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
CODEL International confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything CODEL International should know
Ask CODEL International to confirmAdd other matching solutions

IoT Apps sends the request to CODEL International and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Omnis for construction and industrial vibration
Omnis for construction and industrial vibrationby Envirosuite

Three-axis terminals send ground velocity records wirelessly to cloud histories and SMS alerts.

Industrial emissions monitoring for plant environmental teams
Industrial emissions monitoring for plant environmental teamsby Envira

Gas and particle analysers send readings through controllers to validated charts and reports.

EnviroConnect
EnviroConnectby Ascent Intellimation

Analyzer readings use connected edge interfaces for pollution-board uploads, SMS alerts and reports.

SustainHub
SustainHubby Cognition.World

Sensor feeds, bills and supplier records feed online software for carbon calculations and reports.

Gas monitoring for industrial process teams
Gas monitoring for industrial process teamsby OPSIS

Optical readings enter connected loggers for concentration trends, selected alarms and reports.

atmosFIR CEM for industrial emissions
atmosFIR CEM for industrial emissionsby Protea

Heated sampling and FTIR analysis supply gas concentrations to local software and plant interfaces.

More from CODEL International

EnergyTech for coal and biomass mills
EnergyTech for coal and biomass millsChamber filters feed gas analysers with wired alarm outputs to plant control systems and…
Stack emissions monitoring for industrial operating teams
Stack emissions monitoring for industrial operating teamsGas, dust and flow instruments send readings to control systems and optional cloud…
EnergyTech for dust filter fault alerts
EnergyTech for dust filter fault alertsTriboelectric probes send particulate readings to local alarms and optional cloud…
Outdoor air and odour monitoring for operators
Outdoor air and odour monitoring for operatorsStations send gas and particulate readings to host servers for reports and dispersion…
TunnelTech
TunnelTechGas, optical and ultrasonic instruments feed wired control systems for ventilation…
Nitrogen oxide treatment monitoring for combustion plants
Nitrogen oxide treatment monitoring for combustion plantsGas analysers and optical instruments feed wired plant systems with inlet, outlet and…

Questions and answers

Can measurements cover both sides of the treatment stage?

Yes. The FGD monitoring scope includes input and output gases with selected dust and flow measurements.

Which in-situ gas analyser is available for this application?

GCEM40 provides selected infrared gas measurements through a process probe.

What does the dual-pass dust instrument add?

DCEM2100 measures opacity or dust concentration by measuring light transmission through the flue gas.

Which sulphur-removal process types are within the application scope?

The application includes wet and dry treatment arrangements, with semi-dry scrubber and wet limestone examples.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite CODEL International to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United Kingdom, IoT Apps estimates $1,900 – $6,300 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from CODEL International.

VendorCODEL International, United Kingdom
DeploymentOn-Premises, Public SaaS
ServicesInstallation, System Integration, Support & Maintenance, Data Analytics, Software Platform
Hardware modelRequired, Mixed Ecosystem
Available inUnited Kingdom

Uses this hardware

Mandatory
CODEL GCEM 50E
CODEL GCEM 50ECODEL International · GCEM 50E · Sensor, Wired
Mandatory
CODEL VCEM5100
CODEL VCEM5100CODEL International · VCEM5100 · Sensor, Wired

Have a question for CODEL International?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.