Dust impact monitoring for construction site teams

Particle sensors and a coarse-dust module send construction-site measurements over cellular to cloud software. Project teams review local trends, configure threshold notices and share selected records with nearby stakeholders.

Dust impact monitoring for construction site teams, image 1 of 3Dust impact monitoring for construction site teams, image 2 of 3Dust impact monitoring for construction site teams, image 3 of 3
Clarity Movement
Headquarters
United States
Deployment
Public SaaS
Services
Installation, Managed Service, Support & Maintenance

About Dust impact monitoring for construction site teams

Construction-site dust monitoring connects project locations with continuing particle measurements and reporting. Clarity Movement provides Node-S sensors, add-on modules and cloud software for construction and demolition projects. Teams use the records to follow local pollutant levels around selected work areas and nearby community locations.

Node-S, the base measurement device, measures fine particulate matter, or PM2.5. The Dust Module adds coarse particulate matter, or PM10, to the same monitoring location. Its inlet tube points upward for outdoor installation, and the module uses an external mains supply or External Power System, the field power arrangement. Cellular communication sends the measurements to the dashboard. A project manager supports planning, collocation and calibration for the selected deployment.

Site teams receive particle histories, device status and configured measurement notices. They review changes during the construction programme and use the records when organising their own dust-control work. Data-sharing tools provide selected public views for workers and nearby stakeholders. The connected dashboard and reports bring coarse and fine particle measurements into the project's continuing environmental review across the installed locations.

How it works

Sense
Measure fine and coarse particles at construction locations.
Connect
Send externally powered module records over cellular service.
Analyze
Review particle trends and selected measurement thresholds.
Act
Notify site teams and share chosen project monitoring records.

Does it fit your project?

Best suited to

  • Construction and demolition projects
  • Site perimeter measurement locations
  • Project environmental operating teams

You need

  • Nodes and selected Dust Modules
  • Mains or external power system
  • Suitable included cellular service
  • Deployment, calibration and threshold plan

Limitations

  • Requires external power for Dust Module
  • Requires upward Dust Module inlet
  • Only installed measurement locations covered
  • No automatic suppression of airborne dust

Cost estimate

Set your scope, see what a Dust impact monitoring for construction site teams deployment costs, then ask Clarity Movement to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,000
$300 – $1,000
$800 – $2,500$800 – $2,500$300 – $1,000
Hardware$800 – $2,500

Sensors, gateways and spare units

Installation and setup$800 – $2,500

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from Clarity Movement. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,300 – $4,600
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; Clarity Movement sees your budget as indicative unless you mark it approved.

3Ask Clarity Movement to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell Clarity Movement how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
Clarity Movement receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,300 – $4,600 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
Clarity Movement confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything Clarity Movement should know
Ask Clarity Movement to confirmAdd other matching solutions

IoT Apps sends the request to Clarity Movement and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Air quality records for facility managers
Air quality records for facility managersby Smarter Technologies

Matched pollutant sensors send local readings through Orion to dashboard views and threshold alerts.

Air quality monitoring for research teams
Air quality monitoring for research teamsby AirGradient

Indoor and outdoor instruments use WiFi to feed study datasets, reference comparisons and exports.

Air quality mapping for local authorities
Air quality mapping for local authoritiesby TELLUS Air Quality

Sensor networks feed cloud screening, calibrated regional estimates and public-facing maps.

Ambient air monitoring for environmental network operators
Ambient air monitoring for environmental network operatorsby Envira

Gas and particle instruments send station values to a control centre for validation and charts.

HydroView for outdoor air quality
HydroView for outdoor air qualityby Geolux

AX500 sends gas and particle readings over Modbus to a logger for trends and threshold checks.

Particulate air quality monitoring for city streets
Particulate air quality monitoring for city streetsby LED Roadway Lighting

Socket-mounted optical units send PM2.5 and PM10 values over cellular to mapped reports.

More from Clarity Movement

Neighbourhood air quality reporting for community groups
Neighbourhood air quality reporting for community groupsSelf-powered sensors feed cloud maps over cellular, with opt-in publishing and website…
Air pollution monitoring for mining site operators
Air pollution monitoring for mining site operatorsSolar sensors send particle and gas values over cellular to cloud maps and measurement…
Outdoor air quality networks for city teams
Outdoor air quality networks for city teamsSmall solar devices send particle and gas values over cellular to mapped views and data…
Outdoor air quality monitoring for school districts
Outdoor air quality monitoring for school districtsSolar devices send fine-particle and nitrogen-dioxide readings over cellular to maps and…
Wildfire smoke monitoring for emergency response teams
Wildfire smoke monitoring for emergency response teamsFour solar particle sensors and a wind module feed cellular cloud tools for mapped…

Questions and answers

Does the construction module measure coarse dust as well as fine particles?

The Dust Module adds PM10 alongside the base node's PM2.5 measurements.

What powers the coarse-dust module?

It requires mains power or an External Power System rather than the base node's onboard solar panel.

How is the dust-module inlet positioned outdoors?

The tall inlet tube points straight upward to maintain its weatherproof arrangement.

Can the project receive selected high-particle notices?

Yes. Dashboard thresholds and rules trigger notifications for the selected particle measurements.

How is this deployment priced?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite Clarity Movement to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $6,000 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from Clarity Movement.

VendorClarity Movement, United States
DeploymentPublic SaaS
ServicesInstallation, Managed Service, Support & Maintenance, Data Analytics, Software Platform
Hardware modelRequired, Proprietary, Not Required
Available inWorldwide

Uses this hardware

Mandatory
Clarity Dust Module
Clarity Dust ModuleClarity Movement · Dust Module · Sensor
Mandatory
Clarity Node-S Air Sensor
Clarity Node-S Air SensorClarity Movement · Node-S · Sensor
Recommended
Clarity Wind & Met Module
Clarity Wind & Met ModuleClarity Movement · Wind & Met Module · Sensor

Have a question for Clarity Movement?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.