Grain inventory monitoring for storage operators

Level instruments or temperature-cable calculations estimate stored volume and weight across bins. Operators review changing stock, receive capacity warnings and plan deliveries from remote records.

Grain inventory monitoring for storage operators, image 1 of 4Grain inventory monitoring for storage operators, image 2 of 4Grain inventory monitoring for storage operators, image 3 of 4Grain inventory monitoring for storage operators, image 4 of 4
AgroLog by Supertech Agroline
Headquarters
Denmark
Deployment
Public SaaS
Services
Installation, Support & Maintenance, Data Analytics

About Grain inventory monitoring for storage operators

Inventory monitoring from AgroLog by Supertech Agroline helps storage operators follow changing stocks inside grain bins. The software shows level, volume and estimated weight for selected containers, allowing staff to compare available capacity without repeated climbing or manual checks. Histories and alarms support delivery planning and help teams investigate unexpected stock changes or an approaching full bin.

CLM Radar, the non-contact level instrument, measures a single surface point and communicates through RS485 Modbus. CLM Bob, the mechanical alternative, lowers a measuring weight and provides a 4-20 mA output. Another method uses temperature cables to classify sensors above or below the grain. AgroLog Manager, the monitoring software, combines those positions with crop type and surface slope to reconstruct a three-dimensional surface and calculate stored volume. Weight remains an estimate derived from density.

Remote records help managers plan replenishment, compare usage and allocate storage before the next delivery. Capacity and overfill warnings support follow-up at the relevant bin. The temperature-cable method takes 12 to 24 hours to respond to a changed fill level and excludes concrete silos, so teams needing quicker measurements can select a dedicated level instrument.

How it works

Sense
Measure crop-surface distance or classify cable sensors
Connect
Carry radar readings over RS485 into the storage system
Analyze
Calculate stored volume and density-based weight estimates
Act
Review capacity alerts and schedule stock movements
Grain inventory monitoring for storage operators, image 2

Does it fit your project?

Best suited to

  • Farm grain storage bins
  • Commercial silo inventory teams
  • Multi-bin stock planning

You need

  • Radar or mechanical level instruments
  • Temperature cables for calculation option
  • Fixed-system controller and gateway
  • Configured inventory monitoring software

Limitations

  • Maximum 40 m radar range
  • Excludes concrete silos for cable estimates
  • Requires 12-24 hours for cable response

Cost estimate

Set your scope, see what a Grain inventory monitoring for storage operators deployment costs, then ask AgroLog by Supertech Agroline to confirm a price and lead time. The estimate is free and needs no contact details.

1Your project

United States
Any
Any
Any
None
No

2Your estimate

$1,900 – $6,000
$300 – $1,000
$800 – $2,500$800 – $2,500$300 – $1,000
Hardware$800 – $2,500

Sensors, gateways and spare units

Installation and setup$800 – $2,500

Site survey, mounting, commissioning and configuration

Software and services$300 – $1,000

Platform subscription, connectivity, data and support

IoT Apps estimate in USD for 1 site and 10 assets in the United States, from comparable deployments, reviewed September 2026. Not a quote from AgroLog by Supertech Agroline. Excludes taxes, shipping, civil works and custom integration. How IoT Apps estimates costs

My budget, first year$3,300 – $4,600
Budget status

The band starts on the medium range of the estimate. Pick the one that matches your plans, or Not sure; AgroLog by Supertech Agroline sees your budget as indicative unless you mark it approved.

3Ask AgroLog by Supertech Agroline to confirm price and lead time

Your details

Name, company and work email are required. Phone is optional.

Hide project details

Company size, project stage and decision timing tell AgroLog by Supertech Agroline how firm the project is and which offer fits: a budgeted project with a decision this quarter gets a firm price and lead time, an early enquiry gets guidance first.

Choose
Choose
Choose
AgroLog by Supertech Agroline receives
Scope1 site, 10 assets, United States, any connectivityBudget$3,300 – $4,600 first year, indicativeYour noteEverything you write belowYour contactName, company and email, when you choose the vendor
AgroLog by Supertech Agroline confirms
Price for this scope
Lead time
What is included and what the installation needs
Anything AgroLog by Supertech Agroline should know
Ask AgroLog by Supertech Agroline to confirmAdd other matching solutions

IoT Apps sends the request to AgroLog by Supertech Agroline and keeps a copy. Vendors usually answer within two working days; IoT Apps follows up if you have no reply after three.

Similar solutions

See all solutions
Tank and silo level monitoring for operators
Tank and silo level monitoring for operatorsby Comtac

Probes send readings over LoRaWAN to connected systems with threshold events and stored data.

Water point level alerts for cattle ranches
Water point level alerts for cattle ranchesby mOOvement

Submersible pressure probes relay depth readings over LoRaWAN to maps, graphs and email notices.

Reservoir level monitoring for water supply operators
Reservoir level monitoring for water supply operatorsby Afira

Field probes send readings over 4G or LoRa to shared dashboards, histories and critical warnings.

Flowi for deep well levels
Flowi for deep well levelsby Assetel

Cabled depth sensors use 4G LTE to feed web charts and SMS warnings for aquifer operators.

Water levels and flow for farm teams
Water levels and flow for farm teamsby Edge Systems

Tank and dam sensors send NB-IoT measurements to app graphs, threshold messages and pump rules.

Water level monitoring for farm operating teams
Water level monitoring for farm operating teamsby EnviroNode IoT Solutions

Pressure or ultrasonic devices send wireless tank and channel records to cloud charts and alarms.

More from AgroLog by Supertech Agroline

Grain aeration control for storage operators
Grain aeration control for storage operatorsWeather and cable sensors feed networked software to switch fans against chosen moisture…
Stored grain condition monitoring for silo operators
Stored grain condition monitoring for silo operatorsSensor cables and GSM spears feed software with thermal and moisture readings for hotspot…
Grain sample testing for harvest teams
Grain sample testing for harvest teamsA handheld grinder syncs results over Bluetooth to an app with location, time and image…

Questions and answers

Which grain-level instrument suits a non-contact measurement?

CLM Radar measures a single surface point over a 0 to 40 m range and sends the result through RS485 Modbus.

What is the mechanical alternative to a silo radar meter?

CLM Bob lowers a measuring weight to the crop surface, measures over a 0 to 30 m range and provides a 4-20 mA output.

How do temperature cables produce a grain-volume estimate?

AgroLog Manager identifies cable sensors above and below the crop, then uses their positions, crop type and surface slope to reconstruct the stored surface and calculate volume.

How quickly does the temperature-cable inventory method react after filling?

The calculation needs 12 to 24 hours to respond to a changed fill level and does not support concrete silos. CLM Radar or CLM Bob provides a dedicated level measurement instead.

What will this deployment cost?

Every page carries a cost estimate by IoT Apps for your own sites and assets; set your budget and invite AgroLog by Supertech Agroline to confirm a price and lead time.

What does a deployment cost?

For 1 site with 10 monitored assets in United States, IoT Apps estimates $1,900 – $6,000 in the first year and $300 – $1,000 every year after. This is an estimate based on comparable deployments, not a quote from AgroLog by Supertech Agroline.

ServicesInstallation, Support & Maintenance, Data Analytics, Software Platform
Hardware modelRequired, Proprietary
Available inWorldwide

Uses this hardware

Recommended
AgroLog CLM Radar
AgroLog CLM RadarAgroLog by Supertech Agroline · CLM Radar · Sensor
Recommended
AgroLog Crop Level Bob
AgroLog Crop Level BobAgroLog by Supertech Agroline · Crop Level Bob · Sensor

Have a question for AgroLog by Supertech Agroline?

IoT Apps Enterprise

Not sure this fits your deployment?

Ask the AI Solution Architect: compare this solution against alternatives, check connectivity for your region and get integration guidance. Included with IoT Apps Enterprise.

Ask the Architect
IoT Apps is an independent platform. Listings do not imply endorsement by or partnership with the vendor. Estimates are indicative and based on comparable deployments, not on vendor quotes.